Description:
EPOAIS 10 is a two component resin based high featured product. Its viscosity allows for the application of paint, both on vertical and horizontal surfaces.
Application:
- Stir the content of each package so as to obtain a uniform blend.
- Mix together by adding component B to component A. When not using the whole amount, the required proportions should be used as indicated.
- Mix manually or using a low speed electric mixer (400-500 rpm).
- Mix in a proportion of 53A : 47B in weight
- Once mixed, use immediately within an open time of 1 hour approximately, according to the temperature.
- Apply the product with a short- threaded paint brush or rubber spatula.
- Apply immediately.
- The support should be covered with EPOAIS 10. In case of joining old hardened concrete to new concrete, apply to the latter within the open time of the mix.
- The expected physical and chemical resistances are achieved after 7 days.
