Description:
TEAIS CAPI-C is a system that consists of injectors so as to protect against rising dampness. It is based on special resins with great damp-proof and waterproofing power. Its great fluidity ensures excellent penetration into the pores until reaching the point of saturation.
Application:
- Remove around 20 cm thick layer above the level of dampness.
- In those cases of extreme dampness, holes of 25 mm diameter approximately are drilled so as to enable ventilation.
- These holes allow the wall to dry and will be left for more time in certain cases for which specially designed baseboards will be used so as to ensure
ventilation.
- Holes are done with a 12 mm drill at every 15 cm height from floor level, being the same as the wall width. The depth of the hole is half the thickness of the
support.
- Place an injector in each hole and leave until it empties.
- Fit the nozzle to each injector, by making a hole in the tube with the cap so as to enable the injection of the fluid through the fitted nozzle.
- The tubes are suitably placed on the wall with special fixings. In case it is not possible to place mechanical fixings, a stand will be set up so as to hold the
tubes in place for injection.
- No definite time is estimated for injection since it will depend on the degree of humidity of the support and its porosity.
- Injection with TEAIS CAPI-C must be done by ensuring proper ventilation and air renewal.
